Home Decor

How to Clean Grout: 5 Methods That Actually Work (UK Guide)

Grey, grimy grout lines? Five proven ways to clean grout — from a baking soda paste to steam —

How to Clean Grout: 5 Methods That Actually Work (UK Guide)

Clean tiles can be completely let down by their grout. Those pale lines between the tiles are porous little dirt magnets — they soak up soap scum, limescale, cooking grease and, in a steamy bathroom, go downright mouldy. And because grout sits slightly recessed below the tile surface, it’s the first thing to show the grime.

The good news: grout is one of the most satisfying things in the home to deep clean. A few hours’ work can make a bathroom or kitchen look freshly tiled — there’s the same quiet thrill to it as finally defrosting a freezer.

Below are five methods that genuinely work, from the gentlest everyday fix to the heavy-duty whitening treatment — plus what to avoid, how to keep grout white afterwards, and when to admit defeat and call a professional.

Before You Start: Know Your Grout

Not all grout behaves the same, and using the wrong cleaner on the wrong type can do real damage. Two things to check before you begin:

  • Coloured grout: if your grout is grey, black or any colour other than white, patch-test any cleaner on a hidden spot first. Chlorine bleach and strong oxygen bleach solutions can lighten tinted grout permanently.
  • Natural stone tiles: if your tiles are marble, limestone, travertine or slate, avoid acidic cleaners (vinegar, limescale removers) entirely — they etch and dull the stone. Stick to pH-neutral cleaners and steam.
  • Unsealed vs sealed: most cement-based grout is porous unless sealed. Unsealed grout stains faster but also responds well to oxygen bleach soaking in.

Method 1: Baking Soda Paste (Everyday Grime)

For grout that’s dusty and dulled rather than genuinely stained, this is where to start. It’s cheap, non-toxic, and you probably have everything in the kitchen already.

  1. Mix bicarbonate of soda (baking soda) with a little water to form a thick paste — about the consistency of toothpaste.
  2. Press the paste into the grout lines with your fingers or a small spatula. Don’t be stingy.
  3. Leave it for 10–15 minutes so it can loosen surface dirt.
  4. Scrub along the grout lines with an old toothbrush or a stiff grout brush, using small circular motions.
  5. Wipe away the residue with a damp sponge, then rinse with clean water and dry with a microfibre cloth.

This won’t shift deep mould, but for a regular refresh between deep cleans it’s ideal.

Method 2: Baking Soda + Hydrogen Peroxide (Mould and Stains)

When the paste alone doesn’t cut it, upgrading the liquid from water to hydrogen peroxide (the standard 3% solution from a pharmacy or chemist) turns a mild abrasive into a genuinely effective stain treatment. It also has mild disinfecting properties, which helps with bathroom mould.

  1. Mix half a cup of bicarbonate of soda with enough hydrogen peroxide to make a soft paste — it should sit on a toothbrush without running off.
  2. Work it into the grout lines and leave for 10–15 minutes.
  3. Scrub with a stiff brush, then wipe and rinse thoroughly.

Don’t stockpile enormous batches — just make what you need for the job, since the mixture loses its fizz over time.

Method 3: Oxygen Bleach (Whitening Power)

Oxygen bleach (sodium percarbonate, sold in most UK supermarkets and hardware shops as a laundry stain remover or “oxy” cleaner) is arguably the best grout whitener for white or light grout. It’s far gentler than chlorine bleach: it whitens without the harsh fumes, and it won’t leave that bleachy yellow cast.

  1. Dissolve the powder in hot water according to the packet instructions.
  2. Mop or sponge the solution over the grout lines and let it sit for 15–30 minutes. For very grimy floors, you can let it dwell longer — the oxygen keeps working.
  3. Scrub, rinse well, and dry.

For vertical bathroom tiles, apply with a sponge or cloth so the solution clings, or work in sections from the bottom up. Skip this method — or patch-test very carefully — on coloured grout, which it can lighten.

Method 4: Steam Cleaning (Chemical-Free Deep Clean)

A handheld steam cleaner with a small brush attachment blasts grime out of grout pores with nothing but hot water vapour. It’s the best option if you want to avoid chemicals altogether, and it’s particularly good on kitchen floors where grease has worked its way in.

  1. Fit the narrow brush nozzle and fill the tank.
  2. Run the brush slowly along the grout lines, letting the steam penetrate.
  3. Wipe up the loosened dirt with a microfibre cloth as you go.

Steam is safe for most glazed tiles and sealed grout, but skip it on cracked grout or unsealed natural stone, where moisture can force its way in and cause problems.

Method 5: Vinegar Spray (Light Maintenance)

A diluted white vinegar spray (roughly one part vinegar to three parts water in a spray bottle) works well as a light-touch maintenance clean for hard water marks and soap film — especially on shower grout you want to keep on top of week to week.

Important caveats: vinegar is acidic, so don’t use it on natural stone tiles or marble-effect porcelain, and don’t let it sit on grout for long periods. Spray, leave for no more than five minutes, scrub lightly and rinse thoroughly. It’s a maintenance habit, not a deep-cleaning solution — and if your grout is already badly stained, start with Method 2 or 3 instead.

Grout Cleaning Methods Compared

Method Best for Cost Effort Avoid if…
Baking soda paste Everyday dust and dullness Pennies Low Deep stains or mould
Baking soda + hydrogen peroxide Mould, brown stains Low Medium Dark coloured grout
Oxygen bleach Whitening yellowed grout Low Medium Coloured grout, natural stone
Steam cleaner Greasy kitchen grout, chemical-free clean Medium (if buying one) Medium Cracked grout, unsealed stone
Diluted vinegar spray Weekly maintenance, hard water marks Pennies Low Stone tiles, deep stains

Bathroom Grout vs Kitchen Grout

The enemy differs by room, so your approach should too.

Bathroom grout

In the bathroom, it’s soap scum, hard water deposits and mould. Ventilation matters as much as cleaning: run the extractor fan (or crack a window) during and after showers, and squeegee or wipe shower tiles after use if you can manage it. It takes seconds and dramatically slows regrowth.

While you’re giving the bathroom a proper refresh, it might be worth sorting the small things too — like removing gel nail polish at home without wrecking your nails, a job most of us put off far longer than we should.

Kitchen grout

In the kitchen, the culprit is grease — from frying, steam and general cooking splatter. Grease-based grime responds best to the steam method or a good oxygen bleach soak, and floor grout near the hob and oven is usually the worst affected.

If the grout behind your hob has you fired up for a wider kitchen deep clean, our guide to cleaning an air fryer covers the other greasy culprit most of us quietly ignore.

What NOT to Do

Grout cleaning has a few genuine pitfalls. Steer clear of these:

  • Don’t use chlorine bleach on coloured grout. It can discolour tinted grout permanently, and even on white grout it’s a blunt instrument — it whitens the surface without necessarily tackling what’s embedded in the pores, and the fumes are miserable in a small bathroom.
  • Don’t mix bleach with vinegar (or any acid). The combination releases chlorine gas, which is dangerous. Never mix cleaning products as a rule.
  • Don’t use wire brushes or abrasive pads. Steel wool and harsh scouring pads scratch tiles and can gouge soft grout, creating more pores for future dirt to hide in.
  • Don’t soak natural stone in acidic cleaners. Vinegar, lemon juice and limescale removers etch marble, limestone and travertine. Use pH-neutral products on stone.
  • Don’t drown the area. Grout is porous — flooding it with water, especially on floors, just pushes dirty water deeper. Apply cleaning solutions to the grout lines specifically, and mop up as you go.

How to Keep Grout White After Cleaning

Cleaning grout is only half the job — keeping it clean is where most people fall down. A few habits make an enormous difference:

  • Dry it after use. In showers, a quick squeegee or towel over the tiles after each use is the single most effective thing you can do.
  • Ventilate. Mould loves damp, still air. Extractor fans and open windows are your best friends.
  • Seal it. Once your grout is clean and bone dry, apply a grout sealer (available at any DIY shop). It fills the pores and makes future cleaning dramatically easier. Reapply every year or two, or whenever water stops beading on the surface.
  • Spot-clean spills promptly. In kitchens, wipe up splashes and spills on tile splashbacks before they set.

That sealed, fresh-clean feeling is worth protecting — it’s the same low-effort luxury as slipping onto our best silk pillowcase UK picks at the end of a long day. Small comforts, big difference.

When to Call a Professional

Sometimes cleaning isn’t the answer. If the grout is crumbling, cracked, coming away from the tiles, or stained so deeply that nothing touches it, it’s time for regrouting or a professional deep clean. A tile specialist can remove old grout and regrout for a fraction of the cost of retiling — and honestly, once grout is physically degraded, no amount of scrubbing will bring it back.

FAQs

Can I use bleach to clean grout?

You can on white grout, but it’s rarely the best option. Chlorine bleach can discolour coloured grout, produces harsh fumes, and whitens the surface without always reaching embedded grime. Oxygen bleach is generally safer and more effective for whitening.

Is vinegar safe to use on grout?

Diluted vinegar is fine for light maintenance on ceramic and porcelain tiles with cement-based grout — but use it briefly and rinse well. Avoid it on natural stone tiles and don’t let it sit on grout for extended periods, as the acidity can weaken unsealed grout over time.

How often should I clean grout?

Wipe shower grout weekly and deep-clean bathroom and kitchen grout every one to three months, depending on use. Homes in hard water areas may need more frequent attention to stop limescale building up in the grout lines.

Why does my grout keep going black again?

Usually it’s a ventilation problem rather than a cleaning problem. If moisture lingers after showers or cooking, mould returns fast. Improve airflow, dry tiles after use, and seal the grout once clean — sealant is what breaks the cycle.

How can I clean grout without scrubbing?

For a lower-effort approach, soak grout lines in an oxygen bleach solution and let it dwell for 20–30 minutes before a light scrub, or use a steam cleaner, which does most of the work for you. Truly stain-free results on badly neglected grout will still need some elbow grease, though.

Last updated: 22 October 2026

Also read: How to Clean Mould Off Walls: UK Guide That Works

Also read: How to Clean Limescale from a Toilet (UK Guide)

Also in our Home cleaning guides: How to Line Clean Beer: A Complete UK Guide

Related guide: how to clean limestone safely.

About Author

kelly thomas

Leave a Reply

Your email address will not be published. Required fields are marked *